LAUSON
TURNTABLE
5
EN
AUX IN ENCODING
1)
BEFORE SWITCH ON THE UNIT, INSERT USB MEMORY DEVICE TO USB SLOT.
2)
PRESS STANDBY BUTTON TO SWITCH ON THE UNIT, THEN SELECT AUX MODE.
3)
PRESS THE REC BUTTON, THEN AUX INDICATOR WILL BE FLASHING.
4)
TO FINISH ENCODING, PRESS REC BUTTON AGAIN, THEN THE UNIT WILL SWITCH TO USB MODE AND
PLAY THE PREVIOUS RECORED TRACK.
REMARK:
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO
-
THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
-
DO NOT PLUG OUT THE USB DEVICE DURING RECORDING.
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA
CONNECTING
1)
PLUG-IN THE USB STRAIGHT WITHOUT BENDING. CONNECTING THE USB UPSIDE DOWN OR
BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA.
2)
PRESS FUNCTION BUTTON REPEATEDLY TO SELECT USB MODE
PLAY / PAUSE BUTTON
/ STOP BUTTON
SKIP UP
/ SKIP DOWN
BUTTON
-
DURING USB PLAYBACK, PRESS SKIP UP
BUTTON ONCE TO PLAY THE NEXT FILE. PRESS AND
HOLD SKIP UP
BUTTON CONTINUOUSLY TO SPEED UP SELECTING FORWARD.
-
DURING MP3 PLAYBACK, PRESS SKIP DOWN
BUTTON ONCE TO PLAY THE PREVIOUS FILE. PRESS
AND HOLD SKIP DOWN
BUTTON CONTINUOUSLY TO SPEED UP SELECTING BACKWARD.
+10 MP3 QUICK SEARCHING
-
PRESS +10 BUTTON, THE UNIT CAN SKIP THE NEXT 10 TRACK FOR QUICKER SELECTION FOR MP3
PLAYBACK.
REPEAT FUNCTION
-
DURING USB PLAYBACK, PRESS REP BUTTON ONCE, USB INDICATOR WILL BE FLASHING, SINGLE
TRACK WILL BE PLAYED REPEATEDLY. PRESS REP BUTTON AGAIN, USB INDICATOR WILL BE FLASHING
RAPIDLY, ALL TRACK IN THE WHOLE USB DEVICE WILL BE REPEATEDLY PLAYED.
REMARK
-
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING
FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A
MALFUNCTION OF THE SYSTEM.
-
THERE ARE NUMEROUS USB DEVICE PRODUCERS ARE. SOLUTION AND FORMAT ARE VARIABLE BETEEN
EACH OTHER. THEREFORE, WE DO NOT GARANTTEE THIS UNIT CAN SUPPORT ALL USB DEVICE FROM
EVERY BRAND.
TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO OTHER MODE
(PHONO, AUX OR RADIO)
FIRST, THEN UN-PLUG THE USB
BLUETOOTH CONNECTION
-
PRESS FUNCTION BUTTON REPEATEDLY TO SELECT BLUETOOTH MODE, BT INDICATOR WILL BE
FLASHING.
-
SELECT “VINTAGE BT” BLUETOOTH EQUIPMENT FOR CONNECTION.
-
AFTER THE CONNECTION, BT INDICATOR LIGHT WILL STAY ON, START TO PLAYBACK YOUR DEVICE.
