FAILURE TO USE THE CORRECT VOLTAGE SETTING ON
THE POWER SUPPLY WILL DAMAGE THE MICROPHONE!
Prior to using your microphone please check to ensure
the voltage switch on the back of the power supply is set
correctly for the voltage in your country.
For 100 to 120V set the voltage selector to 115V.
For 220 to 240V set the voltage selector to 230V.
NEVER SUPPLY POWER TO THE MICROPHONE OR
POWER SUPPLY WITH THE COVER OFF. SERIOUS INJURY
CAN OCCUR.
NOTE: THERE ARE NO USER SERVICABLE PARTS INSIDE
THE MICROPHONE OR POWER SUPPLY.
FOR SERVICE PLEASE SEND THE MICROPHONE OR
POWER SUPPLY TO AN AUTHORIZED LAUTEN AUDIO
SERVICE CENTER.
FOR INFORMATION ON HOW TO CONNECT THE
MICROPHONE PLEASE REFER TO THE QUICK START
GUIDE OR CONNECTIONS SECTION OF THE MANUAL.
Only authorized Lauten Audio technicians should perform disassembly and maintenance on any part of
this microphone or its accessories. Disassembling and modifying any part of this microphone may void its
warranty.
NEVER DISASSEMBLE THE MICROPHONE WHEN POWER IS BEING
WARNING!
