LS-308 Overview and Operation Manual – Version 1.3
COPYRIGHT 2019 LAUTEN AUDIO
Page | 3
Detailed Description
The LS-308 offers 270 degrees of side and rear frequency rejection reducing nearby sound by up to
25dB. The rejection is achieved with Lauten Audios’ unique dual, large-diaphragm pressure gradient
transducer element in combination with its specially designed circuit. The LS-308 is intended for use in
multi-person close-proximity vocal dialogue, like close-quarter broadcast commentary, or when the
rejection of other instruments, crowds, etc., in a live studio, on-stage or sound reinforcement is desired.
The LS-308 does not require pre-attenuation and can handle 135dB+ of SPL. The circuit also allows for
an ultra-wide 120db of dynamic range. These features give engineers the ability to capture high dynamic
sources, and in noisy environments.
The Independent, multi-stage, high and low-cut filters help engineers balance recordings at the
microphone and aid in successfully capturing the source. The 2-stage low-cut aids in reducing low
frequency rumble and proximity effect. The 2-stage high-cut helps tame high frequencies.
Fully accessorized both internally and externally, the LS-308 comes with the following.
Internally shock mounted transducer elements to help reduce rumble and handling.
Detachable side swing arm mount
Hard mount for added mounting versatility
Foam windscreen to protect the transducer element from plosives, wind, and debris
Hard-case that fits all accessories and built for the rigors of the road.
Unlike any microphone of its kind on the market today, the LS-308 offers exceptional noise rejection and
dynamic-range capabilities for recording in challenging environments.
Key Features
270° degrees of off-axis sound rejection
Full 120dB (135dB total) of dynamic range without the need of additional attenuation
Independent 2-stage low and high-cut frequency switches
Internally shock mounted pressure gradient condenser elements
Swing-arm mount with 135 degrees of movement (removable)
Included threaded hard mount
Foam windscreen for plosive and wind rejection
