3. Align bottom panel on top of base plate
and connect them together by securely
installing (5) M5 X 12 screws through the
designated 90 degree metal brackets with a
philips screwdriver.
4. Align top portion on top of bottom panel
and connect them together by securely
installing (5) M5 X 12 screws through the
designated 90 degree metal brackets with a
philips screwdriver.
7
ASSEMBLY INSTRUCTIONS
3
Hardware Used
DD
x 5
x 1
PP
Philips
screwdriver
4
Screw Ø8×15 mm
Hardware Used
DD
x 5
x 1
PP
Philips
screwdriver
Screw Ø8×15 mm