9
Installing and uninstalling battery
To install the battery, remove the back cover from the phone by pressing firmly
on the cover and slide it down. Align the golden contacts of the battery to the
contacts in the phone, and then gently snap down the battery into place.
Re-assemble the back cover.
To uninstall the battery, flip the battery out from the bottom of the battery.
Charging battery
Plug the charger into the socket on the side of your phone. Connect the
charger to an AC wall socket. The blinking of the battery level icon indicates the
battery is being charged. When the blinking stops, it indicates the charging is
finished.
During charging, the phone and charger will feel warm to the touch. This is
normal.
Warning:
The operating ambient temperature range of the charger is 0 C-50 C. Do
not use the charger when the temperature exceeds this limit.
Use only chargers approved by the phone manufacturer to ensure safety.
Failing to comply with this will violate the terms and conditions of the
warranty.
Using battery
The waiting time and calling time capacities specified by the phone
manufacturer are obtained under ideal operating environment. The actual
values will vary with the network condition, operating environment and
operation method.
Please comply with the local regulations on battery disposal (such as recycling).
Do not dispose it as household waste.
Battery level indicator
When the phone is on, the battery level indicator is located at the upper right
corner of the screen.
Memory Card
To install the T-flash card, remove the back cover and battery from the phone.
Pull card deck and then put it up, then the T-Flash card can be installed
Make the same operations to uninstall the T-flash card.
Connecting to the Network
SIM Card
Please insert available Subscriber Identity Module (SIM) card into your phone
before using it. SIM card is supplied by your network carrier.
All the information related to network connection is recorded on the SIM card,
so is the contact information such as names, phone numbers and SMSs that
you set to store on the SIM. You can take out the SIM card from the phone and
insert it into another GSM phone to use it. Most new phones will recognize the
SIM card automatically.
Do not touch the golden contacts of the SIM card; place it away from electricity
and magnetism to avoid damage. You will not be able to use the phone if the
SIM card is damaged.
Note:
Before inserting and taking out the SIM card, always make sure that the
phone is switched off and disconnected from any external power source;
otherwise both the phone and the SIM card may be damaged.
Installing and uninstalling SIM Card
The SIM card usually comes attached to a special card. The metal contacts of
SIM card can be easily damaged by scratching, so take it out carefully before
assembling it into the phone.
Switch off the phone, remove the back cover, battery and other external power
source. Fit the SIM card into the SIM card slot. Align the angled corner of the
SIM card with the slot. Slide in the SIM card, make sure it is in place, install the
battery, and restore the back cover.
Likewise, to remove the SIM card, switch off the phone, remove the battery
and then take out the SIM card.
Connecting to the Network
After the SIM card is unlocked, your phone will automatically search for the
registered network or other available local network. Once connected, the name
of the network carrier will appear on the top of the screen.
Your phone is now in Standby mode, ready for making and receiving calls.
