•
Door open:
« Please check that the door is closed properly and then press START/
PAUSE ».
•
Anti-flooding system has activated:
« Anti
-
flooding system has been activated. Please
check inlet/drain pipe connections ».
Once the problem has been eliminated, press the button
7
to restart the programme. If af-
ter all checks, the problem persists, contact your local Service Centre.
Problem
Possible cause/Solution
The washing machine does not start:
The door has not been closed.
« Please check
that the door is closed properly and then
press START/PAUSE ».
• Close the door firmly.
The plug is not properly inserted in the power
socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical instal-
lation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and
the button
7
has not been pressed.
• Please turn the selector dial and press the
button
7
again.
The delay start has been selected.
• If the laundry is to be washed immediately,
cancel the delay start.
The Child safety lock has been activated.
• Deactivate this device.
The machine does not fill:
The water tap is closed.
« Cannot fill water.
Please check that the tap is open and then
press button START/PAUSE ».
• Open the water tap.
The inlet hose is squashed or kinked.
« Cannot
fill water. Please check that the tap is open
and then press button START/PAUSE ».
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve fil-
ter are blocked.
• Clean the water inlet filters. (See "Cleaning
the water inlet filters" for more details)
The door is not properly closed.
« Please check
that the door is closed properly and then
press START/PAUSE ».
• Close the door firmly.
The machine fills then empties immediately:
The end of the drain hose is too low.
• Refer to relevant paragraph in «Water drain-
age» section.
28
What to do if…
Downloaded From WashingMachine-Manual.com Manuals