Information for the electrician
29
Information for the electrician
When connecting the appliance without a plug, care must be taken
that this is done correctly. Please follow the relevant information in the
section on installing and connecting the appliance.
For appliances with variable voltage settings, the switch-over diagram
can be found on the cover of the connection box at the back of the
appliance.
If the appliance is connected by a plug to 230 V AC, only a Type
12 L+N+PE 250 V, 10 A Swiss plug may be used in accordance with
Standard Specifications Sheet SEV 6534-2,1991. The plug must be
installed in phase in accordance with the rating plate (it is essential
that phase L of the socket is contacted with the brown wire of the
mains cable).
Improper connection can lead to the risk of a fire in the dryer.
Special accessories
You can obtain the following special accessories from your retailer.
Vent hose
To conduct exhaust fumes, a flexible spiral conduit with a diameter of
105 mm can be obtained through your AEG Service Force Centre or at a
specialised electrical shop. This spiral conduit is easy to fit and is easily
attached to the vented tumble dryer using the adapter that comes with
the appliance (see enclosed booklet „Installation Instructions for
Vented Tumble Dryer“).
Stacking kit
With these kits you can combine your laundry dryer with any LAVAMAT
automatic washing machine to a washing and drying column. The
appliances are stacked in space-economising manner in this arrange-
ment, the washing machine at the bottom and the laundry dryer at the
top.
The following two kits are available:
– without plate
E-No. 916 018 900
– with extendible deposit plate
E-No. 916 018 901