23
EN
TROUBLESHOOTING
EN
20
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
· Voltage: 220-240 V, 50-60 Hz
· Total power: 1000 W
· Water tank capacity: 2.7 l
· Weight: 7.2 kg
· Materials used for machine body: thermoplastic
· Used capsule tray capacity: approx. 25 single-serving capsules
· Clock digit dimensions 50 mm x 15 mm
· Dimensions: Height
310 mm
Width
300 mm
Depth
323 mm
For technical specifications please refer to the data plate found on the machine.
2006/42 CE – 2004/108 CE – 2006 /95 CE
For problems not covered by the above table, or in the event that the suggested solutions do not resolve the
problem, contact a Lavazza service centre
Problem
Possible causes
Solution
The machine won’t switch on.
»
Machine not connected to
power source.
»
Check it is plugged in correctly.
The lights flash quickly.
»
There is a fault.
»
Contact customer services or the service
centre.
The capsule load lever won’t
return to the closed position.
»
The drop collection/used cap-
sule tray is full.
»
Capsule inserted incorrectly.
»
Empty the drop collection/used capsule tray.
»
Lift the capsule load lever and correctly insert
the capsule.
The pump is very noisy.
»
Not enough water in water tank.
»
Filter inserted incorrectly.
»
Fill with fresh drinkable water.
»
Check that the Brita® is inserted correctly (see
instructions supplied with filter).
The machine doesn’t dispense
any espresso.
»
No capsule inserted.
»
Required temperature not yet
reached.
»
Capsule load lever up.
»
Not enough water in water tank.
»
Filter inserted incorrectly.
»
Insert capsule.
»
Wait until the correct temperature has been
reached.
»
Lower the capsule load lever.
»
Fill with fresh drinkable water.
»
Check that the Brita® is inserted correctly (see
instructions supplied with filter).
The espresso comes out too
quickly, there is no crema in the
espresso.
»
The inserted capsule has already
been used.
»
Insert new capsule.
No foam is formed in the milk or
cappuccino.
»
Milk not suitable.
»
Milk not cold enough.
»
Steam dispenser tube blocked.
»
Use fresh, semi-skimmed milk.
»
Use refrigerated milk.
»
Clean the steam tube with a needle and
clean the steam arm.
No steam is dispensed
»
Steam arm/hot water tube
blocked.
»
Not enough water in water tank.
»
Filter inserted incorrectly
»
Clean the steam arm (see maintenance and
cleaning); if the problem persists clean the dis-
penser hole with a thin needle, making sure it
is free of blockages, then turn on the machine
and dispense a small quantity of steam.
»
Fill with fresh drinkable water.
»
Check that the Brita® is inserted correctly (see
instructions supplied with filter).
The machine does not reach the
correct temperature (LAVAZZA-
TIME sign off ).
»
Starting temperature too low.
»
Turn off the machine and turn it on again.
Summary of Contents for EP 1800 LAVAZZA TIME
Page 81: ...NOTE ...
Page 82: ...NOTE ...
Page 83: ...NOTE ...
Page 84: ...Model EP1800 EP1801 10070205 03 04 15 absoluteaftersales it www lavazza com ...