11
horizontal surface which is stable enough to prevent the machine from tipping
over or falling.
If the machine is installed inside a moving vehicle, check that the removable support
plate is properly fastened to the work surface besides, the machine’s front must never
look in the direction of the moving vehicle.
2)
Sufficient ventilation.
The “Espresso Point” machine produces heat and must therefore be placed in an
environment which is large enough to guarantee the dispersion of the heat which
may be generated by repeated use. Do not place the machine close to electric or
gas radiators or inside hot ovens.
The “Espresso Point” machine is designed to work at 24V in direct current. Never connect
the power cable to clamps or sockets with different voltage or alternate current.
The cable must have a section of at least 4 mm
2
2
.
Check that the power cables are correctly arranged on the work surface and that they
are not exposed to hot parts.
NEVER dismantle the machine’s bodywork or carry out repairs.
Do not use the machine with damaged power cables or after a malfunction.
Repair it before further use.
Repairs may only be carried out by specialist staff.
Do not expose the machine to weather conditions and do not immerse in water.
BOX CONTENTS
This box contains the following articles:
1)
one EP 2140 machine
2)
this manual.
INSTALLATION
Restrain the machine to a horizontal ledge.
The 3Espresso Point2 machine is arranged for the assemblage on extraction binary in
order to make easier the ordinary maintenance and the cleaning. The kit of the sliding
support is available like optional. For any order quote the Lavazza code 79203. The
instructions are given in the manual of maintenance of the machine.
GB
EP 2140 EP 24V:“EP 2140 EP 24V M44010” 9-03-2010 18:57 Pagina 11
