40
IT
EN
To start supplying:
press the ESPRESSO (30 ml) or
press the LONG ESPRESSO (45 ml).
The machine will stop delivery automatically when the
programmed measure is reached.
The supply button will light up to a blinking white light
when the product is being supplied. You can stop supply-
ing by pressing the supply button again.
If, during the dispensing cycle power supply is inter-
rupted proceed as follows:
- Restore the power supply.
- Press the On/Stand-by and wait for the button to
light up to a steady white light.
- Replace the capsule inside the capsule fitting com-
partment with a new one.
- Restart the coffee dispensing.
If, during the dispensing cycle water is exhausted
within the tank proceed as follows:
- Fill the water tank up to the indicated MAX level.
- Replace the capsule inside the capsule fitting com-
partment with a new one.
- Restart the coffee dispensing.
Supplying without a capsule the doses may not re-
spect the programmed quantity.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
To supply again, wait until both the supply button and
the On/Stand-by button come on to a steady white
light.
PREPARING THE COFFEE
Summary of Contents for IDOLA
Page 147: ......
