E N
27
· Voltage: 220-240 V / 50-60 Hz
· Rated power: 1000 W
· Tank capacity: 3 l
· Weight: 8,7 kg
· Materials used in housing and frame: thermoplastic
· Size: Height 36,5 cm - Length 36,5 cm - Depth 29,0 cm
The technical characteristics are illustrated on the nameplate/data label attached to the machine itself.
2006/42 CE – 2004/108 CE – 2006 /95 CE
For any other types of failure not described in the above table or in cases where the suggested solutions do
not solve the problem, contact a Lavazza customer-assistance centre.
Problem encountered
Possible causes
Solution
The machine does not turn on.
»
The machine is not connected to the mains
power supply.
»
Make sure the plugs are inserted properly.
The pilot lights are blinking at a fast rate
or the following symbol appears on the
display:
»
A failure has occurred.
»
Contact the customer-assistance service/centre.
The capsule-loading lever will not close
properly.
»
The used capsule or drip tray is full.
»
Capsule inserted incorrectly.
»
Empty the used capsule or drip tray.
»
Raise the capsule-loading lever and insert the capsule
correctly.
The pump does not start.
»
There is no water in the tank.
»
Top up with fresh, drinking water and repeat the hydrau-
lic circuit washing operation.
The machine does not brew espresso.
»
Capsule not inserted.
»
Operating temperature has not been reached.
»
Capsule-loading lever is raised.
»
No water in the tank.
»
Filter not inserted correctly.
»
Insert a capsule.
»
Wait until the correct temperature has been reached.
»
Lower the capsule-loading lever.
»
Top up with fresh drinking water and repeat loading of
the hydraulic circuit.
»
Check insertion of the Brita® filter and repeat loading
of the hydraulic circuit (see the instructions provided
with the filter).
The espresso is not hot enough.
»
The cups are cold.
»
Preheat the cups, filling them with warm water.
The espresso spurts out too quickly, and
cream does not form in espresso drinks.
»
A used capsule has been inserted.
»
Insert a new capsule.
Latte or cappuccino froth is not produced.
»
The milk is not cold enough.
»
The milk frother tube is obstructed.
»
Use milk at refrigerator temperature.
»
Carry out automatic cleaning of the mixer; if necessary,
extract the milk frother rod, check whether it is dam-
aged and perform cleaning manually. If the problem
cannot be solved, contact a service centre.
Latte or cappuccino froth is not produced.
»
The milk frother does not rotate.
»
Carry out automatic cleaning of the mixer; if necessary,
extract the milk frother rod, check whether it is dam-
aged and perform cleaning manually. If the problem
cannot be solved, contact a service centre.
No steam is dispensed from the mixer.
»
The milk frother tube is obstructed.
»
No water in the tank.
»
Filter not inserted correctly.
»
Carry out automatic cleaning of the mixer. If the prob-
lem cannot be solved, contact a service centre.
»
Top up with fresh drinking water and repeat loading of
the hydraulic circuit.
»
Check insertion of the Brita® filter and repeat loading
of the hydraulic circuit (see the instructions provided
with the filter).
TROUBLESHOOTING
TECHNICAL CHARACTERISTICS
Summary of Contents for LB 1200 GALACTICA
Page 101: ...NOTE ...
Page 102: ...NOTE ...
Page 103: ...NOTE ...
Page 104: ...absoluteaftersales it Model LB 1200 10062897 00 03 12 ...