Insert a capsule into the capsule holder, attach the cap-
sule-holder to the brewing unit and tighten it firmly.
Press the desired dose key (3): wait for coffee dispen-
sing to be completed (the LED lights up).
To stop coffee dispensing in advance press the same di-
spensing key or the STOP/PROG key (2) again.
Note
In order to dispense coffee manually, the
STOP/PROG key (2) should be used. Press this key
to start coffee dispensing and press it again to stop.
7.2.8. Preparation of hot drinks
Dispensing hot water
Place the jug under the hot water nozzle (A).
Press the hot water key (B).
When the set quantity of water is reached, dispensing
stops automatically.
Attention
Do not touch the hot water pipe because it is a com-
ponent which reaches high temperatures.
Dispensing steam (only LB 2801-LB 2811 models)
Immerse the steam nozzle (4) in the liquid to be heated.
Turn the steam knob anticlockwise (3).
To stop steam dispensing, turn the knob (3) clockwise.
Attention
Before using the steam to warm drinks or froth the
milk, it is necessary to dispense steam to comple-
tely discharge the condensation.
Attention
Handle the steam pipe carefully using the rubber
piece (5) and do not touch the hot water pipe be-
cause they are components which can reach high
temperatures.
2
3
3
5
2
2
B
A
5
2
2
4
5
3
Manual code 10066574 / Rel. 2.00 / February 2012
15
Maintenance manual for technical assistance
