9.2.3. Replacing the perforator
To replace the perforator proceed as follows:
- with a small screwdriver, remove the spring (1) that
blocks the perforator (2) in the capsule-holder seat;
- remove the perforator (2) and replace it with a new
one;
- place the spring (1) back into position.
9.3. Cleaning
For perfect cleaning and efficiency of the appliance, se-
veral simple daily cleaning operations are necessary on
the functional parts and accessories as well as the body
panels. These operations must be carried out by the
user.
The indications given here are applicable for normal use
of the coffee machine. If the machine is heavily used
then cleaning should be performed more frequently.
It is recommended to always carry out cleaning with
completely clean and hygienic cloths.
Warning
Cleaning must be always carried out with comple-
tely clean and hygienic cloths.
Attention
During cleaning, be careful with the tips of the cap-
sule perforator located inside the clamping ring of
the unit.
9.3.1. Cappuccinatore (only LB 2800 - LB 2810 mo-
dels)
Clean the cappuccinatore several times during the day
in case of a continuous use of the machine.
Attention
Clean the cappuccinatore after any use, to prevent
any operation failure and ensure the hygiene of the
system. Do not detach the cappuccinatore from the
steam pipe.
To keep the cappuccinatore clean and efficient carry out
the following procedure that does not include the disas-
sembly of the cappuccinatore from the steam pipe.
A) Place the programming lever to the OFF position.
B) Put a large jug under the cappuccinatore (1).
C) Immerse the milk suction pipe (2) into a solution com-
posed of 500 ml of water and detergent for cappuc-
cinatore following the manufacturer’s instructions.
2
1
1
2
1
20
Manual code 10066574 / Rel. 2.00 / February 2012
Maintenance manual for technical assistance
