28
EN
HEAT MILK
Proceed as shown in points and in
section “
HEAT AND FROTH MILK
”
.
Pour milk into the milk frother in an
amount between the
MIN
level mark and
the
MILK
level mark
.
Do not fill the milk frother beyond the
MILK level (180 ml), otherwise milk
may come out.
For optimal result, we recommend using
unskimmed milk (pasteurized or UHT),
refrigerated (4-8°C). Do not use milk at
room temperature.
Put the cover on the milk frother.
Position the milk frother on the base.
Make sure the lower side of the milk
frother and the base are dry.
USE OF THE MILK FROTHER
Press the multifunction button twice quickly.
The lid must always be inserted during
operation.
Press the multifunction button twice
quickly. The second click must be
within one second from the first one.
Do not remove the milk frother from
the base before completing the cycle.
The appliance emits a double beep.
The multifunction button comes on with
white light flashing slowly.
The appliance starts the preparation.
The heating process ends automatically
when the milk is sufficiently hot.
The appliance emits a double beep to in-
dicate the end of the heating process.
The multifunction button turns off.
2
CLICK
