30
EN
FROTHING COLD MILK
It is possible to froth milk without hav-
ing to heat it up. Proceed as shown in
points to in section “
HEAT AND
FROTH MILK
”.
For optimal cold milk foam, we recom-
mend using skimmed milk (pasteurized
or UHT), refrigerated (4-8°C). Do not
use milk at room temperature.
Press and hold the multifunction button
for at least 3 seconds.
The appliance emits a long sound.
The multifunction button turns on with a
quick white flashing light.
The appliance starts the preparation.
After a minute the frothing process ends
automatically.
The appliance emits a double beep to indi-
cate the end of the frothing cycle.
The multifunction button turns off.
Remove the milk frother from the base.
USE OF THE MILK FROTHER
Open the lid and pour the frothed milk
into the cup.
Make sure the whisk is in the milk
frother while milk is poured into the
cup.
TEMPORARY OR FINAL INTER-
RUPTION OF THE CYCLE
To stop preparation, press the multifunc-
tion button again.
To resume preparation, press the multi-
function button again.
If the milk is sufficiently hot at the mo-
ment of the interruption of the process,
the appliance will not be able to be re-
started.
The multifunction button will come on
with red light flashing.
>
3
SEC
