25
EN
CLEAN CYCLE FIRSTUSE
Before using the appliance carry out a
preliminary cleaning cycle.
Remove the cover and fill the milk frother
with fresh, non-aerated drinking water up
to the
FOAM
level mark
(120 ml).
Put the cover on the milk frother.
Press the multifunction button to start the
cleaning cycle
.
The appliance sounds a double acoustic
signal to indicate the end of the cleaning
cycle.
Remove the milk frother from the base,
empty it and clean all the components.
INSERT ACCESSORIES
Do not use the milk frother without in-
serting the whisk.
Remove the milk frother cover.
Insert the whisk inside the milk frother.
Put the cover on the milk frother.
PREPARATION OF THE MILK FROTHER