3
18
7.1 Before use
1. Unpack the device.
2. Ensure that your hair is clean, dry and combed.
7.2 Curling hair
1.
Connect the device to the mains meeting the requirements specified on the
product label and in this guide.
2. Turn the device on by sliding the On/Off switch tin the direction of the status
light. The status light will go on.
CAUTION! The device heats up during operation. Do not touch the heating
element, as you could get burned.
3. Wait a few minutes until the device reaches its working temperature.
4. Hold a strand of your hair and wind it onto the shaft. Hold the device in this
position for approx. 10 seconds without touching the heating element. To make
curls looser/thicker, wind thicker/thinner strands on the wider/narrower part of
the shaft, respectively.
5. Release the curled strand and withdraw the shaft.
6. Do the same with the remaining strands.
7. Apply hairspray to your hair. Wait until the device cools down before modelling
your hairdo.
8. Turn the device off by sliding the on / off switch, towards the power cord.
9. Disconnect the device from the mains.
7. OPERATION
Caution! Risk of suffocation! For safety, keep packaging parts (plastic
bags, cardboard boxes, Styrofoam etc.) out of children’s reach.
1. 1 x Mini hair curler
2. 1 x Case
3. 1 x User guide
Open the box and carefully remove the contents. Ensure that the product is complete
and none of its components, including plastic parts and power cord, is damaged. If
any part is damaged or missing, contact the dealer and do not use the product. Keep
the packing materials or recycle them in accordance with the applicable regulations.
6. PACKAGE CONTENTS
