WWW.LAVEX.COM
4
User Manual
4. FLOOR SCRUBBER USE AND CARE
a. Use the correct floor scrubber for your application. The correct floor scrubber will do the job better and safer at
the rate for which it was designed.
b. Do not use the floor scrubber if the switch does not turn it on and off. Any floor scrubber that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect your floor scrubber from the power source before making any adjustments, changing accessories,
or storing the unit. Such preventive safety measures reduce the risk of starting the floor scrubber accidentally.
d. Store idle floor scrubbers out of the reach of children and do not allow persons unfamiliar with the floor scrubber
or these instructions to operate the floor scrubber.
e. Maintain floor scrubbers and accessories. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the floor scrubber’s operation. If damaged, have the floor scrubber
repaired before use. Accidents may be caused by poorly maintained floor scrubbers.
f. Only use the floor scrubber and accessories in accordance with these instructions. Always take into account the
working conditions and the work to be performed. Use of the floor scrubber for unintended functions could result
in hazardous situations.
g. Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool in unexpected situations.
5. SERVICE
a. Have your floor scrubber serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the floor scrubber is maintained.
Specific Safety Rules
•
For your safety, do not turn on your floor scrubber or try to use it until it is completely assembled according to these
instructions, and until you have completely read and understood this user manual.
•
Always keep hands out of the path of floor scrubber. Avoid awkward hand positions where a sudden slip could cause your
hand to move into the floor scrubber.
•
Make sure there are no nails or foreign objects in the area that is being cleaned.
•
Protect your eyes. Always wear safety goggles while machine is in use to avoid potential eye damage.
•
Everyday glasses only have impact resistant lenses and ARE NOT safety glasses. For your own protection, make sure your
safety glasses or goggles comply with the ANSI Z87.1 Safety Standard.
•
Never use this floor scrubber without the provided GFCI.
•
Always verify that the GFCI is working correctly before starting work.
•
Replacement of the plug or the power cord shall always be carried out by the manufacturer or a designated
service organization.
•
Keep liquid clear of the parts of the scrubber and away from persons in the working area.