WWW.LAVEX.COM
7
User Manual
Operation & Maintenance
WARNING:
Be sure to read and understand this manual in its entirety before operation.
Failure to do so may result in damage or injury.
PROPER SETUP AND PREPARATION
Ensure that all components are assembled tightly and secured, and that power source matches voltage of your unit.
WARNING:
Do not operate this unit near flammable or combustible objects.
For Scrubbing or Polishing:
OPERATION
•
Insert machine key and turn.
•
Press the power button on the scrubber.
•
Press the water button to activate the dispensing pump.
•
Press the vacuum switch to activate the vacuum.
•
Push squeegee lever down till squeegee is contacting the floor.
•
Hold both brush motor switches in the handle to activate the motor.
•
Walk slowly when cleaning and pay attention to potential obstacles.
Solution Tank
•
Check that the brush / pad driver is properly attached to the scrubber.
•
Confirm that the squeegee assembly is properly attached and moving freely with the scrubber.
PREPARATION
•
Remove debris and any obstructions from cleaning surface before operation.
•
Adjust handle to a comfortable position.
•
Both hands should always be on the unit when in use.
•
Fill solution tank with water or diluted detergent with a maximum temperature of 122°F.
•
To extend machine life, use detergents with a neutral pH and low foam.
