WWW.LAVEX.COM
9
User Manual
MAINTENANCE
To control the amount of water dispensed by the machine:
•
Adjust water dispensing by using the ball valve on the front of the machine above the brush assembly.
To replace or rotate squeegee:
•
Rotate star nuts counterclockwise to remove assembly from shaft.
•
Remove seven hexagon screws to take out the front squeegee and metal retaining strip.
•
Release squeegee clasp to loosen the rear squeegee assembly.
•
Remove the rear squeegee.
•
Check wear of squeegee and replace if needed. Squeegees have four sides and can be rotated before replacing.
Water Pipe
Ball Valve
Star Nut
Retaining Metal
Strip Assembly
Front Squeegee
Front Retaining
Metal Strip Assembly
Rear Retaining
Metal Strip Assembly
Rear Squeegee
Squeegee Clasp
Star Nut
Hexagon
Socket
Screw
Quick Connector
