INSTRUCTION MANUAL
•
3
POWER OUTLET
GROUND FAULT CIRCUIT
INTERRUPTER (GFCI) OUTLET
The GFCI protects the user from potential electrical shock. Should it detect a sudden ground fault,
the GFCI will interrupt the current and turn off power to the unit. It will also fault/trip when a short
circuit or overload occurs. If the GFCI faults/trips, unplug the unit, and look for potential hazards
such as standing water, a damaged cord, etc. Once the problem is corrected, plug the unit back
in, push the “Reset” button, located on the GFCI faceplate, and re-start the blower. If blower does
not re-start, refer to the troubleshooting section of this manual.
Grounding Instructions:
This blower MUST BE grounded. Grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This blower is equipped with a
cord and grounding plug which must be inserted into an appropriate outlet that is in compliance
with all local codes and ordinances. Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. Never modify the power cord in any way.
Power Cord Warning:
Never operate units with damaged power cords or damaged extension
cords as this may lead to electrical or fire hazards. Never unplug the unit by pulling the cord.
Grasp the plug firmly and pull straight out. Take precautions not to use the cord in a way where
damage may occur. Keep cords away from all water and heated surfaces. Inspect cords before
each use and replace cords that show any sign of damage.
Extension Cord Warning:
Extension cords must be grounded and be able to deliver the
appropriate voltage to the unit. Extension cords up to 25 feet long should use 14 AWG wire. Cords
up to 50 feet long should use 12 AWG wire. When operating the unit outdoors, do not use an
extension cord.
This blower is equipped with a built-in GFCI outlet that allows you to “daisy chain” multiple
units together in order to operate in large areas where power outlets are limited in number or
unavailable. All other warnings for use of this blower should be strictly adhered to.
