Superabrasive
Owner’s Manual Original Language – Lavina
®
LA2000-230
01/2019
6
8. SAFETY PRECAUTIONS
RECOM
MENDED USE The LAVINA® LA2000-230
Air cleaner is designed and manufactured for dry use
only.
For
more
information,
please
contact
Superabrasive.
PROHIBITED USE The air cleaner MUST NOT be
used
: • For applications apart from those stated in this
manual
• For non-suitable materials (e.g. asbestos or other
toxic materials)
• In environments which (1) Possess the risk of
explosion, (2) Possess high concentration of powders
or oil substances in the air, (3) Possess the risk of fire,
(4)
Feature
inclement conditions,
(5)
Possess
electromagnetic radiation
• The air cleaner should be not connected to electrical
power when performing maintenance-related tasks
PREPARATION FOR WORK
Ensure that:
• You have closed the work area, so that no person
unfamiliar with operating the air cleaner can enter the
area • There are no missing parts on your machine
• The machine is in an upright, working position
• All protection devices are working properly
• The electrical cable is free to move and follow the air
cleaner easily. In order to keep the electrical cable
from being damaged, no vehicle should enter the area
where electrical cables are present.
ARREST FUNCTIONS Functions for arresting of the
air cleaner include following:
• Button to stop the motor
SAFE USE The LAVINA® LA2000-230 is designed
to eliminate all potential risks associated with its use.
However, accidents may occur if unskilled or
uninstructed workers fail to heed the list of potential
risks below:
• Position Risks due to operator’s incorrect working
position
• Tangling Risks due to wearing inappropriate working
clothes
• Training Risks due to lack of operational training
NOTE: Machine operators should follow the instructions
in the manual at all times.
RESIDUAL RISKS During normal operating and
maintenance cycles, the operator is exposed to some
residual risks, which cannot be eliminated due to the
nature of machine operation.
BEFORE YOU BEGIN
• A first-time operator must always read the manual and
heed all safety instructions.
• All electric connections and cables must be inspected
for potential damage.
• Ground wire system of the power supply must be also
inspected.
• Perform general daily inspections of the air cleaner
and inspect the air cleaner before each use for any sign
of damage.
• Inspect all safety devices.
• The air cleaner /filters must be clean and the hose
should be connected.
OPERATING THE MACHINE When operating the
LAVINA® LA2000-230, be sure that no one else is
within close proximity to the air cleaner. Never leave
the air cleaner unattended while working. The
electrical cable and hose must move freely, be
damage-free, and should never run beneath the air
cleaner .
AFTER WORK IS COMPLETED
When work is complete, clean the air cleaner and its
surroundings sufficiently, unplug the air cleaner and
wind up the electrical cable, secure the hose, and store
the air cleaner in a safe and secure place.
THE WORK AREA Ensure that the area is free of
unauthorized people or vehicles, secure all cables and
hoses, and always check the floor for debris.
PERSONAL
PROTECTIVE
EQUIPMENT
(PPE)
When operating the air cleaner, always wear safety
shoes, ear protectors, safety gloves, breathing mask
(protection class FFP3 - especially when changing
filters), and suitable clothing. All persons within the
immediate working area must wear safety glasses with
side shields.
OPERATOR The operator must be aware of the
mahin’s work environment, be properly trained prior to
operating the equipment, and fully understand this
manual. The operator must understand and interpret
all the drawings and designs in manual, understand all
sanitation and safety regulations pertaining to its
operation, know how to perform in an emergency
situation, and have an adequate technical knowledge
and preparation.
