Superabrasive
Owner’s Manual Original Language – Lavina
®
LA2000-230
01/2019
9
9.3 PRE-FILTER CHANGE
IMPORTANT: Before performing any work or maintenance on the air
scrubber, be sure to wear the proper protective equipment. This may
include clothing which covers any exposed skin, protective eyewear, a
respirator, and/or protective gloves conforming to protection class
FFP3.
To change the pre filter, first Toggle the motor switch to the “0” position
to turn it off.. Lift out the pre filter , and place it gently in a plastic bag.
This bag must be properly disposed of. Insert a new filter.
CAUTION: If you are removing the filters in order to clean them, hitting
the filter with force or use of compressed air will destroy the filters.
9.4 HEPA FILTER CHANGE
To change the hepa filter, first unlock the 4
latches (pos.1) and remove the front frame cover
(pos.2). Lift out the used hepa filter (pos.3), and
place it gently in a plastic bag. This bag must be
properly disposed of.
Insert a the new hepa filter, place the
front frame cover and lock the latches.
IMPORTANT
:
The used filer and debris
must be disposed of using methods which fully
comply with local, environmental laws and
regulations.
Figure 4
Figure 5
