6
Operation
The
CleanJet
allows the dilution of chemical products with water without
using an electrical or other power source. The only energy required is the
pressure of the water passing through a venturi which aspirates a metered
chemical into the flow of water through the venturi.
When the installation is properly completed,follow these steps:
1.
Turn on the water supply
2.
Select the desired cleaning phase
- Selector facing up
“OFF”
- Selector facing right
“PRODUCT N° 1”
- Selector facing down
“RINSE”
- Selector facing left
“PRODUCT N° 2”
3.
Activate the spray gun
4.
Shut off the water supply when not in use
Accessories & Options:
The
CleanJet Sprayer comes standard with Blue Trigger Sprayer (PN 410-0001) and 25 ft Black Hose (PN 410-0002).
Black Fan Foaming attachment (no air required) - PN 410-0007
Faoming Wand and Gauge System (air required) - PN 410-0008
AutoScubber Gun Attachment; 3/4" Hose Barb Fitting - PN 400-0048
25ft Hose; 3/4" FGHT x 3/4" MGHT - PN 410-0002 (not shown)
