manualshive.com logo in svg

Lavor BSW 1000 ST, Use And Maintenance Manual

The Lavor BSW 1000 ST is a powerful and reliable pressure washer designed for both professional and domestic use. Easy to operate and maintain, this outstanding product ensures exceptional cleaning performance. To unleash its full potential, make sure to download the free Use and Maintenance Manual from 88.208.23.73:8080 to maximize its longevity and efficiency.

Share
Download
background image

BSW 1000 ST

12

ROUES

•

Roue en caoutchouc super-élastique (diamètre extérieur 252 x 77 largeur).............................................................................. Avant

3,00 - 4

Arrière

3,00 - 4

DIRECTION

•

Guidon  avec colonne .................................................................................................................................................................. sur roue avant

•

Espace minimum pour inversion en U......................................................................................................................................... mm

2900

FREINS

•

A tambour sur les roues arrière avec commande à pédale et transmission mécanique

POIDS

•

Poids en état de marche (sans opérateur)..................................................................................................................................... kg

230

PERFORMANCES

•

Vitesse de fonctionnement............................................................................................................................................................ km/h

5,5

•

Vitesse maxi. de déplacement ...................................................................................................................................................... km/h 

5,8

•

Vitesse maxi. en marche arrière................................................................................................................................................... km/h 

4

•

Inclinaison maximum surmontable (en service) .......................................................................................................................... %

15

•

Inclinaison maximum surmontable.............................................................................................................................................. %

16

______________________________________________________________________________________________________________

WHEELS

•

Superelastic tyre wheel (outer 

φ

 252x77 mm width) .................................................................................................................. front

3.00-4

 rear

3.00-4

STEERING

•

Handlebar with column................................................................................................................................................................ on front wheel

•

Minimum turning circle ............................................................................................................................................................... mm

2900

BRAKES

•

Drum brake on rear wheel, with mechanical pedal and linkage

WEIGHT

•

Weight in running order (without operator) ................................................................................................................................ kg

230

PERFORMANCE

•

Working speed.............................................................................................................................................................................. km/h

5.5

•

Maximum transfer speed.............................................................................................................................................................. km/h

5.8

•

Speed in reverse............................................................................................................................................................................ km/h

4

•

Maximum negotiable gradient (working).................................................................................................................................... %

15

•

Maximum negotiable gradient (transfer) ..................................................................................................................................... %

16

RÄDER

•

Räder aus superelastischem Gummi (Außendurchmesser 252 x 77 Breite)............................................................................... vorne

3.00 - 4

hinten

3.00 - 4

LENKUNG

•

Lenkung mit Lenksäule ............................................................................................................................................................... auf Vorderrad

•

Mindestraum für Umsteuerung.................................................................................................................................................... mm

2900

BREMSEN

•

Trommelbremse auf den Hinterrädern mit Pedalbetätigung und mechanischer Übertragung

GEWICHT

•

Gewicht bei Betrieb (ohne Bediener)........................................................................................................................................... kg

230

LEISTUNGEN

•

Arbeitsgeschwindigkeit ................................................................................................................................................................ km/h

5,5

•

Max. Fahrgeschwindigkeit........................................................................................................................................................... km/h

5,8

•

Rückwärtsfahrgeschwindigkeit.................................................................................................................................................... km/h

4

•

Max. Steigfähigkeit bei der Arbeit...............................................................................................................................................  %

15

•

Max. Steigfähigkeit......................................................................................................................................................................  %

16

Summary of Contents for BSW 1000 ST

































































Reviews:

No comments

Related manuals for BSW 1000 ST

Pattfield E-LS 2545 E Operating Instructions Manual preview
E-LS 2545 E
Brand: Pattfield Pages: 60
Poulan Pro P624ES Owner'S Manual preview
P624ES
Brand: Poulan Pro Pages: 40
EGO POWER + SNT2400E Manual preview
POWER + SNT2400E
Brand: EGO Pages: 108
Stiga 2259976 Operator'S Manual preview
2259976
Brand: Stiga Pages: 402
SNOWJOE 24V-X4-SB21 Operator'S Manual preview
24V-X4-SB21
Brand: SNOWJOE Pages: 60
ICP MF080014C Installation Instructions Manual preview
MF080014C
Brand: ICP Pages: 12
SNOWJOE SJ627E-RM Operator'S Manual preview
SJ627E-RM
Brand: SNOWJOE Pages: 20
Poulan Pro 961980021 Owner'S Manual preview
961980021
Brand: Poulan Pro Pages: 22
Tanaka TRB 24EA Handling Instructions Manual preview
TRB 24EA
Brand: Tanaka Pages: 12
Cub Cadet 1030E Owner'S Manual preview
1030E
Brand: Cub Cadet Pages: 16
Troy-Bilt 2890 Operator'S Manual preview
2890
Brand: Troy-Bilt Pages: 24
Troy-Bilt 13045 Polar Blast Operator'S Manual preview
13045 Polar Blast
Brand: Troy-Bilt Pages: 28
IKRA Mogatec Gartenmeister GM ALB 40 Operating Instructions Manual preview
Gartenmeister GM ALB 40
Brand: IKRA Mogatec Pages: 56
Ikra ILS 3000 E Translation Of The Original Instructions preview
ILS 3000 E
Brand: Ikra Pages: 32
Schulte RDX-117 Operator'S Manual preview
RDX-117
Brand: Schulte Pages: 94
Toro 38073 Series Operator'S Manual preview
38073 Series
Brand: Toro Pages: 60
KENT 9087112020 Instructions For Use Manual preview
9087112020
Brand: KENT Pages: 92
Toro 38635 Operator'S Manual preview
38635
Brand: Toro Pages: 24

Brands by name

Popular brands

Load more brands