39
EQUIPMENT ON THE SWEEPER CONTROL PANEL (FIG. 11)
1) FILTER SHAKE BUTTON
2) HORN BUTTON
3) WORK LIGHT SWITCH
4) BATTERY LED
5) HOUR METER
6) IGNITION KEY
7) ACCELERATOR
FILTER SHAKE BUTTON (Detail 1):
This is used to make the suction fi lters vibrate electrically (to clean them), by means of an electric vibrator;
it must be pressed at least 5/6 times for 4/5 seconds every time (this procedure must be carried out before
operating the machine, before emptying out the debris hopper and the motor must be off) .
HORN BUTTON (Detail 2):
Press this button to sound the horn (Klaxon) .
WORK LIGHT SWITCH (Detail 3):
This is used to turn the work lights on .
BATTERY LED (Detail 4):
This LED indicate the presence of the battery current . In normal operating conditions, the LED is turned on
before the startup of the engine and is turned off when the engine is running; visa versa it indicates the low
battery charge .
HOUR METER (Detail 5):
An instrument that displays the number of hours of work carried out by the machine .
IGNITION KEY (Detail 6):
This is used by turning it clockwise. At the fi rst notch, the user turns on the services: hazard lights,
headlights, horn, electric fi lter vibrator and electric start; by turning it clockwise even further, the
engine will start. See ignition and stop.
ACCELERATOR (Detail 7):
This is used to increase or decrease motor rpm.
Summary of Contents for CSW 1300 D
Page 188: ...cod 7 700 0577 00 05 2022...
