12
C.
ASSEMBLING OF PLASTIC GUARD AND OF LINE CUTTER
Unscrew the plastic guard.
Slide the plastic guard along the lower transmission shaft, up to the « U » part, provided for this
purpose.
Place the plastic guard on the « U » aligning its holes with those of the « U » part.
Tighten the screw and tighten the plastic guard on the transmission shaft, so that it cannot come
loose during use, due to vibrations.
Once the plastic guard in place, remove the plastic cover from the line cutter,
which is located underneath the guard.
D.
ATTACHING AND DETACHING OF RETAINING STRAP
Be equipped with a retaining strap.
Adjust the length and the width of the strap so to obtain a comfortable
position.
Hook or unhook the clasp of the strap at the attachment ring provided on the
shaft.