13
Warning!
After switching off the device the impeller wheel continues to rotate for some time.
Danger of injury due to rotating tool.
Warning!
If the engine continues to run with the switch in the Stop position, push the choke
lever to the fully closed position.
OPERATION
Initial Operation
Before switching on the device, make sure it is not in contact with any objects. Ensure stable
positioning.
1. Put on the carrying strap (5) and adjust it to the optimum length.
2. Open the quick-release fastener and move the additional grip to the desired position.
Reclose the quick-release fastener.
3.Turn the operation mode selector (12) to the symbol required.
5. Switch on‘
︱
’,push primer bubble button (9) 10 times, then turn chock level to “Start”,
then pull the recoil starter until the engine starts.
6. The choke lever will restore to the normal position(“RUN”) after engine starts.
7. Push throttle trigger(6),the product will speed up,while the engine will return to initial
speed once the trigger is released.
8. Engine will run at a certain speed if rotating accelerograph button(17) to a fixed level
without touching throttle trigger, and accelerograph button returns to normal place when
pushing trigger.
9. During operation, hold the device with one hand on the casing grip and the other on the
additional grip. Grip the handles inside of the vibration-dampened areas.
10. To stop the engine, push the power switch to ‘O’ position.
Blowing operating mode
Suction operating mode
BEFORE CHANGING THE OPERATING MODE, IT IS ABSOLUTELY NECESSARY TO SWITCH
OFF THE DEVICE.
CAUTION: Do not touch the motor until it has cooled down.
Summary of Contents for LK BV 30 AUTO
Page 2: ......