ASSEMBLY
Assembling The Front Handle (Bike Handle)
( Fig. 2-3 )
NOTE:
The 2 screws needed for attaching the bike handle to the upper shaft are found already in
the bike handle holes. They must be removed for installation.
• Align the respective handle (7) with the bracket (8) on the upper shaft (5) (Fig. 2).
• Attach the handle to the bracket on the upper shaft and fasten it with screws (Fig. 3).
Shaft Assembly ( Fig. 4-5 )
• Align the upper shaft (5) with the lower
shaft (11). The triangle-shaped recesses
(A) must face each other (Fig. 4).
• Insert the upper shaft (5) into the lower
shaft (11).
• Fasten both shafts with the locking sleeve
(10) (Fig. 5).
Safety Guard ( Fig. 7 )
NOTE:
The 3 screws for attaching the guard to the motor housing
are found already in the motor housing. They must be
removed for installation.
• Attach the safety guard (15a) to the motor housing (12) using the
3 supplied screws. (12a) (Fig. 7).
Follow the assembly instructions step-by-step and use the pictures provided as a visual guide to easily
assemble the product! Do not connect the product to power supply before it is completely assembled!
WARNING
The product must be fully assembled before operation! Do not use a product that is only partly
assembled or assembled with damaged parts!
Fig. 2
8
7
screws
5
11
A
10
Fig. 3
Fig. 4
Fig. 5
13
12
15a
12a
Fig. 7
Summary of Contents for CLBC4009K
Page 24: ...24 EXPLODED VIEW CLBC4009K EXPLODED VIEW...
Page 26: ...26 NOTES...
