BATTERY PACK AND CHARGER
OPERATION
Connect Battery Pack
• Make sure the on/off switch is in its off position.
• Attach the battery pack to the product. Ensure it snaps in place.
• Your product is now ready to be used.
NOTE:
Please consult the instructions for use supplied with battery pack and charger for more details.
Intended Use
This cordless brush cutter is designated with rated voltage of 36V d.c.. It is designed only to be used
with battery packs 40LB4001. For safety reasons it is essential to read the entire instruction manual
before first operation and to observe all the instructions therein. This product is intended for private
domestic use only, not for any commercial trade use. It must not be used for any purposes other than
those described.
ON / OFF Switch
(Bike Handle)
1. Press the lock-off button and hold it in position (Fig. 17, STEP 1).
2. Press the on/off switch to switch the product on (Fig. 17, STEP 2).
The lock-off button can then be released.
3. Release the on/off switch to switch the product off.
Fig. 15
Fig. 16
Fig. 17
16
1
A
1a
2.
1.
1.
A
B
6b
6a
6
STEP 1
STEP 2
Summary of Contents for CLBC4009K
Page 24: ...24 EXPLODED VIEW CLBC4009K EXPLODED VIEW...
Page 26: ...26 NOTES...