LawnMaster CLHT2218B, Operator'S Manual

Charging the Battery (See figs 4 - 5)

The battery pack (10) for this product has been shipped in a low charge condition. 
Charge it fully before first use. 

9

OPERATION

WARNING! Always remove the battery pack from the product 
for charging! Charge in a safe location away from moisture, 
heat or any hazard to the charger or other danger!

NOTE: It is normal for the battery pack and charger to become 
warm (but not hot) during charging process. If the battery does 
not charge properly, check to make sure the electrical outlet 
is "live".

WARNING! Always charge the battery before storage! 
To reduce risk of fire, never leave the battery connected with 
the charger for more than 24 hours! 

WARNING! Check the voltage and current! The voltage and 
current must comply with the information on the rating label!

Ɣ

Align the battery pack (10) to the slots on the charger and slide it in until it 

    locks in place (Fig. 4, 5).

Ɣ

Connect the charger (12) to the power supply.

Ɣ

Allow sufficient charging time (see technical data), and then disconnect the 

    charger from the power supply.

Ɣ

Press the release button on the battery pack (10) and remove it from the charger.

Fig. 4

Fig. 5