LawnMaster L951151, Translation Of The Original Instructions For Use

6

Caution! A certain residual risk, which cannot be eliminated, always remains even 

in the case of proper use of the tool. The following potential hazards can be 

derived from the type and design of the tool:

• Contact with the unprotected cutting head (cuts).

• Reaching into the scythe when it is running (cuts).

• Hearing damage if no appropriate protection is worn.

• Dust and gas formation that is harmful to health if the equipment is used in enclosed spaces 

  (nausea).

Additional Safety Regulations

1. Caution! Always keep hands and feet away from the cutting area, particularly

    when starting the equipment. 

2. Always hold the equipment with both hands on the multifunction handle. 

   Always keep the equipment at an appropriately safe distance from the body and assume a stable 

   body position. Always use the carrying strap.

3. Always wear safety goggles.

4. Use the equipment only in daylight or with the option of good artificial lighting.

5. Do not use the equipment in the rain or on damp grass.

6. Before use or after an impact, check the equipment for possible damage; repair if necessary.

7. Do not use the equipment if the safety devices are damaged or not correctly installed.

8. Ensure that the engine ventilation slots, protective cover and cutting device are always free of 

    dirt or residues.

9. During the work processes, always ensure that there are neither people nor animals within a 

    radius of at least 15 m. Switch off the equipment immediately if anyone and particularly a child 

    comes into the range of the machine. When using the equipment, stones and other elements 

    that can cause serious injuries can be thrown out.

10. When the equipment is in operation, keep away from the moving parts (in the area of the 

      cutting devices). After switching off, the cutting head continues to turn for a few seconds.

11. Before using the equipment, remove stones, twigs and any other solid material from the 

      working area. Start the machine only as described in the instructions. It must not be turned 

      upside down or be in the working position when it is started. Do not cross gravel roads or 

      paths with the equipment running.