crystal standard configuration User Manual
Version: 6.4.0/4
67/149
8. Operation
8.4
The Central Modules
The two Central Modules provide access to global options and shortcuts, output metering and monitoring
controls for the loudspeakers and headphones.
On a 4-fader surface there is only one Central Module. This means that functions from the second Central
Module (on the right) must be controlled from DisplayDock.
1
Output Metering
The two stereo meters provide
for the follow monitor output (on the left) and PGM 1 output (on
the right). The meters work in parallel with the meters on the DOCK.
2
Ambient Light Detector
This detector automatically adjusts the brightness of buttons and displays on the control surface according to
the ambient light level. It can be enabled or disabled from the
3
Function Keys
The 8 function keys are dual engraved to perform the following functions:
INP
,
DYN
,
LIM
,
DEL
or
EQ
to adjust parameters for the source in access.
BUS
and then select a page (
1
to
5
) to map bus assignments onto the Fader Module.
UNLOCK
+
SNAP RECALL
+ a memory number (
1
to
5
) to recall settings
from a local snapshot.
SNAP STORE
works in a similar manner.
