crystal standard configuration User Manual
Version: 6.4.0/4
73/149
8. Operation
8.7
Input Gain & Pan
Rotary Control Parameters (MIC source)
The quickest way to adjust input gain, or the left/right pan position, is to turn the fader strip rotary control.
For MIC sources, two separate input gains are available:
Mic
gain (in the analog mic preamp) and channel
Gain
(applied in the digital domain). For other sources, only channel
Gain
is available.
For a mono source, you will see left/right pan. For a stereo source, this changes to left/right balance.
1
.
Turn the rotary control to adjust the first parameter - you will see both its name (e.g.
Mic
gain) and
value (e.g.
+42dB
).
2
.
Press down on the rotary control to step to the next parameter (e.g. channel
Gain
).
3
.
Press down again to reach the next parameter (e.g. left/right pan).
4
.
If you keep tapping down, then the sequence repeats. The available parameters for a mono MIC
source are shown above.
To interrogate parameters without making a change, tap down on the rotary control without turning - the
display will show the parameter and its current value.
For more information on gain ranges and other input parameters, please see
.
