crystal standard configuration User Manual
Version: 6.4.0/4
89/149
8. Operation
3-band Parametric Equalizer
Surface Controls (3-band EQ)
DisplayDock
For the 3-band parametric EQ, each band can be adjusted separately using the three sets of controls: EQ
LOW, EQ MID and EQ HIGH.
For each band, the following parameters are available:
·
Gain
:
Low
,
Mid
and
High
- Gain can be adjusted from -15dB to +15dB.
·
Frequency
:
Low
,
Mid
and
High
- Frequency can be adjusted from 20Hz to 18kHz.
·
Q
- press the
+
or
–
buttons to increase or decrease the
Q
for each band. Q can be adjusted from 0.7
to 5.0.
For the GAIN/FREQ control, turn to adjust the Gain, and then press down and turn to adjust Frequency.
The
EQ
button acts as the master on/off for the complete section: 3-band parametric EQ + 2-band filters.
