crystal standard configuration User Manual
Version: 6.4.0/4
91/149
8. Operation
8.9
Metering
8.9.1
Output Metering
DisplayDock and the Central Modules include two output meters: follow MONITOR and PGM 1:
·
MONITOR
- meters the Control Room monitor source, before the CR volume and mute/dim. If a
PFL /
CUE
button is active, then the meter automatically switches to the pre-fader listen bus level. It will return
to the active monitor source once all PFL / CUE selections are cleared.
·
PGM 1
-
always
meters the PGM 1 output.
Both meters are stereo PPMs (Peak Program Meters) and use a digital scale relative to 0dBFS.
On the control surface, each meter is accompanied by a stereo correlation meter. On DisplayDock, you also
have loudness metering for PGM 1. On a 4-fader console, there is no second Central Module and so the PGM 1
meter appears on DisplayDock only.
