![background image](http://html1.mh-extra.com/html/lawo/crystal/crystal_user-manual_3953505274.webp)
crystal User Manual
Version: 6.6.0/2
274/459
14. Control Surface Configuration
"System -> Definition -> Parameter = Faders 1"
Then select the
AccessGrp 1
tab and scroll down to access the "
Parameter
=
Faders 1
" options:
Parameter
Faders 1 – reference name for the element.
Dim Source Colors
Sets defined source colors to dim.
User Labels On
User Labels Off
User Labels Toggle
These control inputs switch User Labels on or off, or toggle their state. They can be used to
configure how operators view User Labels on the surface.
Enable Large User Labels
This control input switches User Labels on the surface to large display mode.
Global switch to Layer 1
Assigns a control input to switch all Fader Modules enabled for layering to Layer 1.
Global switch to Layer 2
Assigns a control input to switch all Fader Modules enabled for layering to Layer 2.
Swap ACCESS Keys
Swaps the function of the Fader Module
ACCESS
Fader Module, then ACCESS 1 and MF 5 are swapped.
Save Channel On/Off
If ticked, the
Channel On/Off
parameter of sums and sources is stored and recalled by
snapshots and memories.
Fader Notch (initial)
Enable/Disable Fader
Notch
Sets the initial value (active after a cold start) for the SYS menu Fader Notch option.
Assigns a control input to enable or disable the Fader Notch.
Hot Fader Mode (initial)
Enable/Disable Hot Fader
Mode
Sets the initial value (active after a cold start) for the System menu's
Assigns a control input to enable or disable Hot Fader mode.