![background image](http://html1.mh-extra.com/html/lawo/crystal/crystal_user-manual_3953505075.webp)
crystal User Manual
Version: 6.6.0/2
75/459
7. Operation
7.10.2
Adjusting Source Parameters
1
.
Select the source you wish to work on by pressing its fader strip
ACCESS
key - the key turns white.
The fader strip soft keys and rotary controls switch into "parameter control" mode, and on VisTool the "Source
Parameters" page appears:
VisTool (Source Parameters page)
Control Surface (INPUT parameters)
VisTool shows all available parameters, and so this is the best way to get an overview of a source.
The surface controls are paged through different parameter sets using the
INP
,
DYN
,
LIM
,
DLY
and
EQ
keys on the Central Module. Note that the rotary controls and soft keys across all 4 fader strips are utlised
when working in this mode.