crystal User Manual
Version: 6.6.0/2
123/459
7. Operation
Ø
To add the User to a User Group
1
.
Select a user group from the list on the left - e.g.
DJs
: - and select
Add
.
DJs
moves to the
Member of
list on the right; Sue is now a member of the
DJs
user group:
2
.
Repeat to add the user to more user groups or, use
Del
to remove a user group.
Each user can belong to several user groups. In this instance the user will see all
to the user groups, and access their
Ø
Snapshot Properties
1
.
Select the
Snapshots
tab to edit the default snapshot group, and order of any login snapshots, for the
user:
·
Default Snap Group
- select a snapshot group from the drop-down menu - in our example,
Music
. This
becomes the group which is automatically selected whenever the user attempts to
VisTool snapshot.
·
Snapshot Order
- snapshots entered in this list are loaded immediately after the user logs in. This can
be used to automatically reset the console for the user's show, or type of work, whenever they login to
the console.
2
.
To configure the console to load snapshots after login, use the
Add
and
Del
buttons to move entries from
the
Snapshots
list (on the left) to the
Snapshot Order
list (on the right).
The
Snapshots
list (on the left) shows everything available in the user's snapshot groups. Remember that
the available snapshot groups are defined by
.
3
.
Use the
Up
and
Down
buttons to change the order in the
Snapshot Order
list (on the right). Snapshots
load from top to bottom after the user successfully logs in.
