diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
112
/
228
Operation
The steps below describe
the
Access
key colors and GUI pages defined in the standard configuration. These aspects may
vary if the configuration is customized.
If the console is fitted with extension modules, then these can be used to adjust parameters for more than one source at a
time. The operation of these controls is described later.
Working with Extension Modules.
1.
Select
a source by pressing a fader strip
Access
key.
The
Access
key lights (full white), the Central Rotary Controls switch into "source parameter" mode and the 'Source
Parameter' dialog box appears on the GUI. The last viewed page opens automatically.
2.
Choose the parameters you wish to adjust by pressing a Central Function Key (on the surface) or a page button (on the
GUI).
For example, press
Input
to adjust the input and pan parameters.
There are seven DSP functions to choose from. The controls use the Lawo LUX color-
coding for
easy identification:
Input
(yellow),
AGC
(yellow),
EQ
(blue),
Dyn
(magenta),
DeEss
(magenta),
Limiter
(magenta) and
Delay
(cyan).
The surface and GUI pages are selected independently. This allows you to adjust different parameters in parallel - for
example, EQ on the surface and Dynamics on the GUI. If a DSP block is disabled in the configuration, then the
corresponding controls are unlit (on the surface) and greyed out (on the GUI).
The
Overview
page appears only on the GUI and is for information only. If you touch something on the
Overview
, then the
corresponding parameter page opens.
