diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
123
/
228
•
•
•
diamond - EQ
EQ processing is available for all sources. The EQ section includes a 3-band parametric EQ plus 2-band filters.
Parametric EQ
There are three bands of parametric EQ: Low, Mid and High. Each band can operate across the full frequency range and is
set independently. The
following parameters
can be adjusted:
Gain
- from -15dB to +15dB.
Frequency
- from 20Hz to 18kHz.
Q
- from 0.7 to 15.
Filters / Shelving EQ
For the 2-band filters, each band can operate either as a fixed slope filter (High Pass/Low Pass) or as a shelving EQ (Low
Shelf/High Shelf).
In High Pass/Low Pass mode, the filter slope is fixed at 12dB per octave. The cut-off frequency can be adjusted from 20Hz
to 18kHz.
In Low Shelf/High Shelf mode, the slope of the shelving EQ is defined by the gain value. Thus, there are two parameters
that can be adjusted: gain (from -15dB to +15dB) and frequency (from 20Hz to 18kHz).
Operation
To access the parameters, press
an
Access
key
(on the fader strip) followed
by
EQ
(on the Central
Function
Keys and/
or
GUI).
Then adjust the parameters from either the surface or GUI.
