diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
134
/
228
•
•
•
•
•
diamond - Delay
Delay can be added to all sources.
The delay time can be adjusted in milliseconds (ms), meters (m) or frames (frs). The maximum delay time is 5.3 seconds.
Delay Parameters
For a 48kHz, PAL system, the values can be adjusted as follows:
Delay time (in ms) = 0 to 5300
Delay time (in meters) = 0 to 1749
Delay time (in frames) = 0 to 132
Operation
To access the parameters, press
an
Access
key (on the fader strip) followed
by
Delay
(on
the Central
Function
Keys and/
or
GUI).
Then adjust the parameters from either the surface or GUI.
On the surface...
There is one page of parameters.
Press
the
Delay
soft
key to
switch the prepared delay time in or out of circuit.
Turn any of the three rotary controls to set the delay time.
