diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
162
/
228
•
•
Loading a Snapshot
The steps below describe how to load a system snapshot.
1.
Press and hold
Unlock
followed by
Load
.
You can see which memories contain data by looking at the color of the numbered soft keys:
Red = contains settings.
Black (unlit) = the memory is empty.
2. Keep
holding
Load
and select a red memory number to load its contents - e.g.
4
.
The
Load
key flashes magenta to indicate a successful operation and the console resets according to the snapshot recall
options (described earlier).
Clearing a Snapshot Memory
The steps below describe how to clear a system snapshot memory.
1.
Press and hold
Unlock
followed by both
Save
AND
Load
.
You can see which memories contain data by looking at the color of the numbered soft keys.
2. Keep
holding
Save
and
Load
and select a red memory number - e.g.
4
.
The snapshot memory is cleared.
You can check the success of the operation by pressing and holding
Unlock
followed by
Load
- the relevant soft key
should now be black (unlit) to show that the memory is empty.
