diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
200
/
228
•
•
•
7.11 diamond VX - Login and Logout
In the standard configuration, some functions are protected by the User Access Rights system. This means that you must
be logged in before they become available.
By default, every system comes with a single "admin" user. Once the "admin" user is logged in, they can add more users
from the 'Admin' pages. The user setup
is
described in more detail in the VisTool MK2 documentation. For now, it is useful
to know that:
Usernames and passwords are NOT case sensitive.
If you have forgotten your password, then an administrator can reset it to "0000".
The initial administrator username = "admin" and password = "default".
Logging In
The steps below describe how to log in. When a new user logs in for the first time, the password = "0000".
1.
Touch the user icon and select
Sign In
(from the user menu).
Alternatively, if someone else is already signed in, touch the user icon and select
Switch User
.
2.
Enter
your username and password, and select the
Login
button.
Providing the credentials are accepted, you will see the message "Login successful!".
3. Select
OK
(to acknowledge the message) and then either
OK
or
Close
(to close the dialog box).
•
•
The 'Login' dialog box has two tabs:
Login
and
Admin
.
From the
Login
tab, you can logout, switch user or change your password.
From the
Admin
tab, you can open the 'Admin' pages (if you have administrator rights). If the page options
are greyed out, then they are not available to the current user.
