diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
206
/
228
•
•
•
7.14 diamond VX - Settings
The 'Settings' dialog box can be used to customize the operation for the current user.
Please note that any changes made are not persistent, and are reset to the default values once the app restarts. The
default values can be changed by editing the "Emberdefault.ini" file (as described later
1.
To open the dialog box, touch the user icon and select
Settings
(from the user menu).
You must
be
access the
Settings
button.
2. Use
the tabs on the left to select a page of settings.
3. To
close the dialog box, select the
X
icon (top right).
In the current release, there are five pages of settings.
'Settings -> Meters'
This tab includes a single option: 'Channel Strip'. It defines whether the input meters on the 'Channel Strip' page
show peak
metering, momentary loudness or both.
To make a change, touch the current value and select an option from the drop-down menu:
Peak
= peak metering only.
Loudness
= momentary loudness only.
Peak & Loudness
= peak me momentary loudness.
