diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
221
/
228
•
•
Surface Modules
The
Surface Modules
tab lists all of the modules fitted to the surface and their firmware versions. The important fields are
as follows.
Mode
-
can be either M or S:
M - identifies the master module (connected to Power Core via IP).
S - identifies the slave modules (connected internally, or externally, via CAN).
Act. Slot
- shows the module's active slot ID. This is important as it determines the functionality of the module (as
The active
slot ID can be changed either, permanently, by editing the
Dflt
(default) value or, temporarily, by loading one of
the alternate mappings (
Map 1
to
4
). How to do this is described in diamond - Slot IDs.
Identify
-
click to identify a module - the top left button on the module flashes three times.
Test
-
opens the "Module Test" tab.
Reboot
- reboots the module.
