diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
222
/
228
•
•
Module Tests
The
Module Tests
tab can be used to test the components on a module.
Module
- enter a slot number to choose a module.
Keys/LEDs
-
click
on a key to light its LED; click on
Test all LEDs
to light all keys; click on
AutoTest
to start the auto test
sequence.
TFT Displays
- click on an option to display an image on the module's displays.
Faders
- choose either
From Panel
or
To Panel
to set the direction and then perform the test. For example:
From Panel + move a fader on the surface = the on-screen fader should follow.
To Panel + click Start / Stop = the fader on the surface should open / close.
You can use
Auto Test
or
Calibrate
to start the auto test sequence or fader calibration.
Incremental Encoders
- works in a similar manner to the faders.
