diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
92
/
228
•
•
6.4 diamond - Central Controls
For the central controls, diamond must include either a Central or Combo module:
The
Central
module is dedicated to central controls and provides the most functionality.
The
Combo
module provides two additional fader strips as well as central controls, and so there is some reduction in
functionality. The Combo Module can be specified in either Fader A or Fader B versions. The fader strip version has no
effect on the central controls.
If the frame is fitted with additional Central or Combo Modules, then these must run in what is known as "monitor mode".
The differences between this and the main module are explained at the end of this topic.
Controls Overview
The central controls are divided into the following areas.
Central Module
Combo Module
