diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
95
/
228
•
•
Standard Configuration - for Combo module
Operation
1. Ambient Light Detectors
The two detectors provide automatic adjustment of the surface brightness according to the ambient light levels. The
detector receiving the most light always wins. So if something covers just one of the detectors by accident, this is ignored.
This function can be disabled by the configuration. In the standard configuration, it is enabled or disabled using the
Surface
Ambient Light Sensor
option in
Surface' dialog box (on the GUI).
2. Central Rotary Controls
Each of the upper rotary controls comes with a display and four small MF keys. The controls are labeled by the display and
have two modes of operation:
When all Function Keys (3) are off, the controls are configurable.
When a Function Key (3) is selected, the controls update to adjust the selected function. For example, press
Input
to
adjust
the
input parameters for the channel in access. In this mode, the functionality is system-defined, and the
controls work in the same way regardless of the configuration.
The Central module provides four sets of controls, while a Combo module provides two. Note that, on a Combo module, the
upper controls from the two fader strips are borrowed whenever a Function Key is active. This ensures that, in this mode,
the operation is identical for both types of module.
