The assembly instructions below are for chair back.
Step1. Lay the back (B) across the arms of the body (A). Lift the back (B) at a slight
angle and align the brackets on the back (B) with the brackets on the body (A). (See
Expanded View Figure 3)
Figure 3
Step2. Lower the back (B) onto the body (A), making sure the back (B) and body (A)
are completely engaged. To make sure the back (B) is properly installed with both
sets of back and body brackets engaged, stand behind the chair and pull the back (B).
If one or both sides move out of position the brackets are not engaged. Remove the
back (B) and repeat the steps. (See Figure 4)
Figure 4